Equipment

Home > About Us > Equipment & Technology > Equipment

A part of Coiling Machines

  • Photo:NCF-10

    Model name NCF-10 See the photo
    Notes CNC Coiling Machine that can coil up to 10 mm wire diameter.
  • Photo:CG60-PA

    Model name CG60-PA See the photo
    Notes The latest CNC coiling machine of 6mm wire diameter. High-speed production is available.
  • Photo:TSC-13V

    Model name TSC-13V See the photo
    Notes Mandrel-type CNC coiling machine that is suitable for coiling a small amount. It can produce compression, extension, and torsion springs. Three models, up to 13 mm, up to 6 mm, up to 3 mm are equipped.
  • Photo:RX-20A

    Model name RX-20A See the photo
    Notes It is a computer-controlled spring forming machine of the 21st century, good at producing torsion spring and wire formed spring in complex shapes. There are two types, up to 2mm and 4mm wire diameter.
  • Photo:UF-20

    Model name UF-20 See the photo
    Notes CNC coiling machine that is suitable for high-speed forming. Supports up to 2mm wire diameter.
  • Photo:VF-812FT

    Model name VF-812FT See the photo
    Notes Produces torsion spring and extension spring.
  • Photo:SE-30

    Model name SE-20 See the photo
    Notes An accurate compression spring coiling machine with built-in spring length gage. It offers a variety of models corresponding to the wire diameter from 0.1 mm to 3 mm. Special long coiling is also available.
  • Photo:VF-704EL

    Model name VF-704EL See the photo
    Notes A standard compression spring forming machine that has types from 0.1 mm to 3 mm wire diameters. Long coiling is available.

A part of spring end grinding machines

  • Photo:NewVP4/40-D

    Model name NewVP4/40-D See the photo
    Notes An automatic spring end grinding machine for mass production spring. Insert springs into a special disk and grind the ends with grindstones. Auto-supply function is attached. There are various types depending on wire diameters.
  • Photo:HRF-V-610

    Model name HRF-V-610 See the photo
    Notes A machine that grind the ends of small amount helical large springs, one end after another.
  • Photo:SDF-8

    Model name SDF-8 See the photo
    Notes A grinding machine with automatic spring length gage that accurately grind medium or large spring.
  • Photo:SDF-4

    Model name SDF-4 See the photo
    Notes A grinding machine with automatic spring length gage. It is possible to automate the setting up of process conditions by its grinding condition program.

Top of Page

A part of heat treatment furnaces

  • Photo:Conveyor seasons TBE-420

    Model name Conveyor type TBE-420 See the photo
    Notes A conveyer belt furnace to perform heat treatment of spring. We are equipped with various types according to the amount of process.
  • Photo:SE-30

    Model name MBA-600B Chamber furnace See the photo
    Notes A batch-type conveyer belt furnace.

Top of Page

A part of the forming machines

  • Photo:FR-60

    Model name FR-60 See the photo
    Notes A forming machine that can perform accurate and complex bending process to plate and wire materials by using molds.

Top of Page

A part of shot peening machines and machine tools

  • Photo:WSB-01

    Model name WSB-01 See the photo
    Notes It is a process that strikes small metal balls on the surface of a spring. The purpose of this treatment is to improve strength of a spring that receives load repeatedly, such as a valve spring.

Top of Page

A part of spring testing machines

  • Photo:PRO-TS-10

    Model name PRO-TS-10 See the photo
    Notes An automatic torsion spring testing machine.
  • Photo:PRO-2000L-S

    Model name PRO-2000L-S See the photo
    Notes An automatic compression and extension spring testing machine that has various types according to its capability. Up to 20KN can be measured.
  • Photo:PRO-10-S

    Model name PRO-10-S See the photo
    Notes An automatic compression and extension spring testing machine. Up to 100N can be measured.

Top of Page

About us